8 Inch Larger Screen Android System OPM VFL VLS SFP OTDR Tester
Model: MOT-85
? 8 inch IPS touch screen, 1920*1200 resolution
? 4 core CPU, support online update and install applications
? Internal storage and external TF card
? Report saved as EXCEL, PDF, or screenshots format etc
? ONE Gigabit SFP port, support insert SFP optical fiber module, for optical fiber network testing
? Support snap shot screen
? Support remote control
? Gigabit network port, support Ping and scan IP address etc
? RJ45 TDR cable’s short and open test
? Improvement cable tester, UTP cable etc continuity test
? PoE power output and PoE voltage and power measurement
? Stable laser source, optical power meter and visual fault locator
OTDR:
? 8 inch IPS touch screen, 1920*1200 resolution
? 1310/1550/1610 wavelength optional, 26/28/30/32/34dB Dynamic range optional, max test range 150KM*
? Stable laser source, support CW/270/330/1000/2000Hz
? Test fiber’s length, loss, attenuation parameters and event map, locate connection point/ fusion point
? Automatic analysis of various linkers/fusion points, easy analyze of various events
? Save and view the testing curves, support zoom and move curves, view details
? Support saving curves number ≥30000pcs
? Support create testing report, curve trajectory graphs, parameter settings, fiber event information, and fiber link information
? Report saved as EXCEL, PDF, or screenshots format etc
? Optical Loss test, detect the optical or optical components loss value .It is a key basic function for confirming the optic fiber installation condition and fault status. Light source shares with OTDR ports outputs laser light.
? Visual Fault Locator, it Outputs red light for checking continuity of launch fibers or short patch cord. Breaks and bending in fiber can be identified visually.
? Stable Laser Source, it shares OTDR optical port and work on the same working wavelength of OTDR, the output power can be adjustable for different testing applications.
? Optical power meter with five wavelength 1625nm,1550nm, 1490nm, 1310nm,1300nm, 850nm, linear or nonlinear optical power display, both for optical power testing and Fiber link loss relative measurement
? Digital multimeter, DC and AC voltage measurement, Resistance measurement, Continuity test, Diode measurements, Capacitance measurement
Cable test:
? Improvement cable tester, UTP cable, telephone cable etc sequence and continuity test, save testing report. Support detect the near-end, mid-end and far-end fault point of the RJ45 cable plug
? Upgraded RJ45 cable TDR test, support cable’s open and short testing, max test 180m
? Cable tracer, search BNC cable, network cable and telephone cable from the mess cables
? Cable length, BNC cable, network cable, telephone cable, RVV cable, elevator cable, and cat 5/6 cable’s length test. Max measurement for cable’s open is 3KM (Short circuit length test not supported)
Other functions:
? ONE Gigabit SFP port, support insert SFP optical fiber module, for optical fiber network testing
? Advanced Network Tool, Scan IP, Route tracking, Socket debugging, ping packet test, DHCP, PPPOE, LLDP
? 7.4V 7800mA Li-ion Battery, 3.5 hours charging, normal working time lasts 11 hours:
| OTDR Technical Specifications |
| Wavelength (nm) Optional * |
1310/1550 |
1610 |
| Only support detects optical signal |
Support |
N/A |
| Support Active fiber testing |
N/A |
Support |
| Dynamic range(dB)2 Optional* |
28/26 |
30/28 |
32/30 |
34/34 |
28 |
30 |
32 |
| Pulse width (ns) |
5,10,20,30,50,80,160,300,500,800,1000,2000,4000,6000,10000,20000 |
| Testing range |
≤150 Km |
| Event blind zone (m)3 |
≤2m |
| Attenuation blind zone (m)3 |
≤10m |
| Linearity (dB/dB) |
±0.05 dB/ dB |
| Loss threshold (dB) |
0.05 |
| Loss resolution ratio (dB) |
0.01 |
| Minimum distance resolution |
0.05 |
| Sampling point(K) |
32-128 |
| Distance uncertainty (m) |
±(1 m + 5×10-5× distance + sampling interval) |
| Distance scope (km) |
0.5,1,2,5,10,25,50,100,200 |
| Typical real-time refreshing duration |
1s |
| File format |
SOR standard format/PDF/EXCEL |
| Measurement duration |
5sec, 10sec, 15sec, 30sec, 1min, 2min, and 3min are selectable |
| Storage |
FLASH (EMMC)8G + TF card |
| Interface type |
FC-PC,SC-PC |
| Remarks: |
| 1. The technical specification describes the ensured performance of the instrument when using typical PC model connector to measure, without considering the uncertainty caused by optical fiber refractivity. |
| 2. Dynamic range is the data measured under the condition of the maximum pulse width and 3 minutes of average time. Dynamic range is the data measured under the condition of 200km/20000ns/3min. |
| 3. Measuring conditions of blind zone: reflection event is within 5Km, reflection strength is 45dB. Measured by the minimum pulse width. |
|
| Specification |
| Size & Display |
8 inch IPS touch screen ,1920*1200 resolution |
| Network Port |
Dual 1000M LAN port, 10/100/1000M auto adapt |
| WIFI |
Built in 2.4G WIFI, speeds150M, display wireless camera image |
| ONE Gigabit SFP port |
support insert SFP optical fiber module, for optical fiber network testing |
| Built in Camera * Optional |
Built in Camera function Customizable ,support 13MP * |
| Laser distance meter* Optional |
Measurement range100m, accuracy±3mm,Laser class 2,Laser type 635nm,Power output <1mW Customizable * |
| Digital Multimeter |
DC and AC voltage measurement, Resistance measurement, Continuity test, Diode measurements, Capacitance measurement |
| UTP cable test |
Test UTP cable connection status and display on the screen. Read the number on the screen. detect the near-end, mid-end and far-end fault point of RJ45 cable connector, can test shield cable |
| RJ45 TDR cable test |
Support cable’s open and short testing, max 180m |
| Digital Cable tracer |
Search BNC cable, network cable and telephone cable from the mess cables. Cable tracer and UTP cable test app in the same interface, also can search shield cable |
| Network test |
Trace route, Link monitor, DHCP server, port flashing, Ping test |
| Electroscope |
Voltage range |
AC12-1000V |
| Frequency |
50/60Hz |
| Alarm type |
Sounds and light double alarms |
| Level |
CAT.III 1000V / CAT.IV 600V;CE |
| PoE Voltage test |
Measurement POE switch or PSE power supply voltage and cable connection status |
| Visual fault locator |
10mW visual fault locator with 650nm wavelength, emit red laser sources to test multi-mode and single mode fiber’s bending and breakage, test range 8KM |
| Digital Multi-meter |
DC and AC voltage measurement, Resistance measurement, Continuity test, Diode measurements, Capacitance measurement |
| Optical power meter |
Wavelength:1625,1550nm,1490nm,1310nm,1300nm,850nm, measurement range ,-70 ~ +10 dBm, for optical power testing and Fiber link loss relative measurement |
| Power |
| External power supply |
DC 12V(2A) |
| Battery |
Built-in 7.4V Li-ion battery, 7800mAh |
| Rechargeable |
After charging 3.5 hours, normal working time 11 hours |
| Parameter |
| Operation setting |
OSD menu, select your desired language: English, Portuguese, Korean, Russian, Italian, French, Polish, Spanish, Japanese, Turkish, Deutsch, Serbian, Czech, Vietnamese etc |
| Auto off |
5-30 (mins) |
| Working environment |
| Working Temperature |
-10?---+50? |
| Working Humidity |
30%-90% |
| Dimension/Weight |
274mmX171mmX50mm / 1.2Kg |
