| ?Stable 4G connection |
| ?Remote active wake-up, two-way audio |
| ?Quick start, start recording within 400ms |
| ?Intelligent detection of human movement, intelligent alarm push |
| ? Powered by an 8000mAh battery (optional 20000mAh), low battery reminder |
| ?Low power system optimization |
| ?Free cloud storage to save alarm videos |
| ?Three-channel recordings |
| ?Dual light source, full color day and night |
| Sorts |
Type |
Parameters |
| System |
Operating system |
Linux |
| Online visitor |
Supports 4 visitors at the same time |
| APP |
O-KAM Pro |
| Collection |
CPU |
T23ZX |
| Internal storage |
1Gbit |
| Image sensor |
GC2083+GC2083+GC2083 1/3CMOS |
| Min. Illumination |
0.8Lux/F1.4(color mode),0.3Lux/F1.4(B&W mode) |
| Lens |
Panorama camera: focal length 4mm,1G3P Tracking camera: focal length 4mm, 1G3P |
| Sensor performance |
Support automatic white balance, automatic gain control and automatic backlight compensation |
| Pan&tilt |
Adjust the angle of the tracking camera via App, horizontal 270 °, vertical 90 °; Manually adjust the angle of the panorama camera, horizontal 180 °, vertical 90 °. |
| Viewing angle |
D100° |
| Video |
Night vision |
Full-color night vision, dual light source |
| Compression standard |
H.264 /MJPEF/JPEG |
| Multi stream |
Main stream: 1080P/12fps Sub stream: 360P/10fps |
| IR control |
When the IR night vision function is enabled, IR and ICR are automatically detected; when the IR night vision function is disabled, IR is off and ICR is fixed in the day vision mode. |
| Bit rate |
CBR/VBR two rate control modes, and the output rate range is 128~4096kbps |
| Image adjustment |
Vertical, horizontal adjustable, OSD display |
| Audio |
Input |
Built-in-38dB microphone |
| Output |
Built-in 8?1W speaker |
| Sampling frequency/bit width |
8KHz/16bit |
| Compression standard/Bit Rate |
G711A |
| AI |
Human detection |
Human detection, filtering invalid video contents |
| Area detection |
Free daub, only monitoring the areas concerned by users |
| Smart notification sound |
Different devices push different sounds, so that you can know exactly which device is triggered |
| Intelligent alarm sound |
Set different equipment alarm sounds according to different scenarios |
| More AI functions (testing) |
Pets, vehicles, parcels, etc |
| Network |
Network connection |
Use APP to scan the QR code on device to add; Use the device to scan QR code on APP to add |
| Cat1 China |
FDD:B1/B3/B8 TDD:B34/B38/B40 |
| Cat4 Overseas |
European/Japanese/American versions |
| Key/interface |
Key 1 |
On/Off key |
| Reset key |
Long press to restore factory settings |
| Storage |
External TF card |
Support TF card (up to 256GB) |
| Cloud storage |
Free cloud storage |
| Alarm |
Sound light alarm |
Sound and light alarm |
| Alarm detection |
Support human detection, PIR detection range: 10 meters |
| Physical Indicators |
Rated voltage |
DC5V/2.5A±5% |
| Power supply |
Built-in 8000mAh battery, optional 20000mAh |
| Consumption |
Sleep standby 300uA, working: 350mA-1.8A max |
| Operating condition |
Working temperature: -10~55?, working humidity <90% |
| Weight |
Net weight: 818g |
| Size |
183*235*180mm |
| Packing list |
Camera*1, TYPE-C*1, manual*1, solar panel*1, solar panel bracket*1 |
