| SPECIFICATION: |
|
| LED Indicators |
| Power Indicator |
Lights up when the device is powered on. |
| Port Indicator (Link/ACT) |
Lights up when the port link is normal; Flashes when data is being transferred |
| POE MAX Indicator |
Lights up when the PoE power supply exceeds the threshold |
| HARDWARE |
| Chipset |
EN8853C+EN8808Q+EN8804F+TMI7608R |
| Button |
1* Reset |
| Ports |
24*100Mbps POE ports |
| 2*1000Mbps uplink ports |
| 2 *Gigabit SFP slots |
| Backplane Bandwidth |
12.8G |
| MAC Address Table |
8K |
| Maximum POE Output Power |
375W |
| Network Media & Transmission Distance |
1000BASE-T: UTP category 5, 5e, 6 or above cable (≤ 100m) |
| 100Base-TX: UTP category 5, 5e, 6 Category 5 (Cat5) or higher UTP/STP cables (≤100m) |
| 10Base-TX: UTP category Category 6 (Cat6) or higher UTP/STP cables (≤250m) |
| Tips:The actual transmission distance is related to the connected terminal/network cable type and condition; it is recommended to use Category 6 cable preferentially. |
| Software |
| Basic Functions |
lComplies with IEEE 802.3 Ethernet and IEEE 802.3u Fast Ethernet protocol standards |
| lCompatible with IEEE 802.3af/at compliant powered devices (PD) |
| lCompatible with certified non-standard powered devices (PD) |
| lSupports store-and-forward switching |
| lSupports full power output |
| lSupports automatic MAC address learning and aging |
| lExtended cable transmission,supports long-distance monitoring power supply |
| lSupports IEEE 802.3X full-duplex flow control and Backpressure half-duplex flow control |
| Ethernet Protocols and Standards |
lIEEE 802.3 10BASE-T Ethernet |
| l IEEE 802.3i 10BASE-T Ethernet |
| l IEEE 802.3u 100BASE-TX Fast Ethernet |
| l IEEE 802.3ab 1000BASE-T Gigabit Ethernet |
| l IEEE 802.3af/at, Power over Ethernet |
| l IEEE 802.3x Flow Control |
| Local management function |
System Info |
| IP Settings |
| Account Settings |
| Port Settings |
| IGMP Snooping |
| Aggregation management |
| Loopback protection |
| Port mirroring |
| Speed Limit |
| Jumbo Frame |
| EEE Config |
| EEE Config |
| LLDP Config |
| LLDP Neighbor |
| QOS |
| MTU VLAN |
| 802.1Q VLAN |
| MAC Manage |
| Storm Control |
| Flow monitoring |
| Cable Diagnostics |
| DHCP Snooping |
| System upgrade |
| Ping Tool |
| Backup and Restore |
| System Reset |
| Save Settings |
| System Reboot |
| Cloud management function |
Storm Control |
| Loop Prevention |
| Port Isolation |
| Automatic extension |
| Anti-spoofing |
| AI watchdog |
| VLAN |
| Rebooting device |
| Speed Limit |
| Port Scheduled Reboot |
| POE Switch |
| Port Status |
| Port Rate Statistic |
| Port Power Statistic |
| Environmental Requirements |
| Temperature |
l Operating Temperature:0? ~ 40?(32 °F ~104°F) |
| l Storage Temperature:-20? ~ 70?(-4 °F ~158°F) |
| Humidity |
l Operating Humidity:10% ~ 90% RH(non-condensing) |
| l Storage Humidity:5% ~ 90% RH(non-condensing) |
| Physical Dimensions |
| Dimensions |
440mmx205mmx44mm(17.32x8.07x1.73 in) |
| (W x D x H) |
| Packaging and Transportation |
| Protective Packing |
EPE protection |
| Others |
| Stacking Limit |
Maximum of 4 layers when fully packaged |
| Humidity |
5%~90% RH(non-condensing) |
| Storage Temperature |
-20? ~ 70?(-4 °F ~158°F),with the most suitable storage condition being room temperature considering humidity |
| Storage Precautions |
Store in a clean,ventilated environment free from corrosive gases,flammable,explosive,and other hazardous chemicals.Keep away from heat sources and sources of strong mechanical vibration |
| Storage Period |
Under the above conditions,the product can be stored for one year.It is recommended to re-inspect and test the product after two years before use |
