STONET (ST119GHPDI-2G1MS-250) 16 PORT POE 10/100 + 2 PORT UPLINK GIGABIT 1x2,5G SFP 250W POE SWITCH

PWR On

The switch is powered on.

PWR Off

The switch is powered off.

Port Indicator  (Link/ACT) On

The corresponding port is connected to a network device but no activity

Port Indicator  (Link/ACT) Flashing

Data is transmitting through the corresponding port.

Port Indicator  (Link/ACT) Off

No device is connected to the corresponding port.

PoE MAX On

Lights up when the PoE power supply exceeds 110W.

PoE MAX Flashing

PoE power supply reaches the maximum PoE output.

PoE MAX Off

the PoE power supply did not exceed 110W.

Ports

16*100Mbps POE ports

2*1000Mbps uplink ports

1*2500Mbps SFP+

DIP Switch

Normal/Port isolation/Extension

Backplane Bandwidth

12.2Gbps

MAC Address Table

8K

Input Power

100-240V~ 50/60Hz

Power Supply

250W

Maximum POE Output Power

225W

Network Media & Transmission Distance

1000BASE-T: UTP category 5, 5e, 6 or above cable (≤ 100m)

100Base-TX:  UTP category 5, 5e, 6 Category 5 (Cat5) or higher UTP/STP cables (≤100m)

10Base-TX: UTP category Category 6 (Cat6) or higher UTP/STP cables (≤250m)

Tips:The actual transmission distance is related to the connected terminal/network cable type and condition; it is recommended to use Category 6 cable preferentially.

Basic Functions

• Complies with IEEE 802.3 Ethernet and IEEE 802.3u Fast Ethernet protocol standards
• Compatible with IEEE 802.3af/at compliant powered devices (PD)
• Compatible with certified non-standard powered devices (PD)
• Supports store-and-forward switching
• Supports full power output
• Supports automatic MAC address learning and aging
• Extended cable transmission,supports long-distance monitoring power supply
• Supports IEEE 802.3X full-duplex flow control and Backpressure half-duplex flow control

Ethernet Protocols and Standards

• IEEE 802.3 10BASE-T Ethernet
• IEEE 802.3i 10BASE-T Ethernet
• IEEE 802.3u 100BASE-TX Fast Ethernet
• IEEE 802.3ab 1000BASE-T Gigabit Ethernet
• IEEE 802.3af/at, Power over Ethernet
• IEEE 802.3x Flow Control

Temperature

• Operating Temperature:0? ~ 45?(32 °F ~113°F)
• Storage Temperature:-40? ~ 70?(-40°F ~158°F)

Humidity

• Operating Humidity:10% ~ 90% RH(non-condensing)
• Storage Humidity:5% ~ 90% RH(non-condensing)

Common Mode

6KV

Dimensions

(W x D x H)

330*180.9*45mm(12.99x7.12x1.77 in)

Protective Packing

EPE protection

Storage Temperature

-40? ~ 70?(-40°F ~158°F),with the most suitable storage condition being room temperature considering humidity

Storage Precautions

Store in a clean,ventilated environment free from corrosive gases,flammable,explosive,and other hazardous chemicals.Keep away from heat sources and sources of strong mechanical vibration

Storage Period

Under the above conditions,the product can be stored for one year.It is recommended to re-inspect and test the product after two years before use