| Specification |
|
|
LED Indicators
|
|
| Power Indicator |
| On |
The switch is powered on. |
| Off |
The switch is powered off. |
| POE / Uplink Indicator (Link/ACT) |
| On |
The corresponding port is connected to a network device but no activity |
| Flashing |
Data is transmitting through the corresponding port. |
| Off |
No device is connected to the corresponding port. |
| Hardware |
|
| Button |
1* Dip Switch |
| Ports |
8*1000Mbps PoE ports |
| 2*1000Mbps uplink ports |
| Backplane Bandwidth |
20 Gbps |
| MAC Address Table |
4K |
| Maximum POE Output Power |
120W |
| Network Media & Transmission Distance |
1000BASE-T: UTP category 5, 5e, 6 or above cable (≤ 100m) |
| |
| 100Base-TX: UTP category 5, 5e, 6 Category 5 (Cat5) or higher UTP/STP cables (≤100m) |
| |
| 10Base-TX: UTP category Category 6 (Cat6) or higher UTP/STP cables (≤250m) |
| |
| Tips:The actual transmission distance is related to the connected terminal/network cable type and condition; it is recommended to use Category 6 cable preferentially. |
| Software |
|
| Basic Functions |
Complies with IEEE 802.3 Ethernet and IEEE 802.3u Fast Ethernet protocol standards |
| Compatible with IEEE 802.3af/at compliant powered devices (PD) |
| Compatible with certified non-standard powered devices (PD) |
| Supports store-and-forward switching |
| Supports full power output |
| Supports automatic MAC address learning and aging |
| Extended cable transmission,supports long-distance monitoring power supply |
| Supports IEEE 802.3X full-duplex flow control and Backpressure half-duplex flow control |
| |
| Ethernet Protocols and Standards |
IEEE 802.3 10BASE-T Ethernet |
| IEEE 802.3i 10BASE-T Ethernet |
| IEEE 802.3u 100BASE-TX Fast Ethernet |
| IEEE 802.3ab 1000BASE-T Gigabit Ethernet |
| IEEE 802.3af/at, Power over Ethernet |
| IEEE 802.3x Flow Control |
| |
| Data Transfer Rate |
POE port :10/100M full-duplex/ half-duplex modes |
| |
| Uplink port : |
| |
| 10/100M full-duplex/ half-duplex modes |
| |
| 1000M full-duplex mode |
| Environmental Requirements |
|
| Temperature |
Operating Temperature:0? ~ 40? |
| Storage Temperature:-40? ~ 70? |
| |
| Humidity |
Operating Humidity:10% ~ 90% RH(non-condensing) |
| Storage Humidity:5% ~ 90% RH(non-condensing) |
| |
| Altitude |
Operating: Max 6500 feet (2000 meters) |
| Storage: Max 6500 feet (2000 meters) |
| |
| Lightning Surge Protection |
|
| Differential Mode |
2KV |
| Common Mode |
4KV |
| Physical Dimensions |
|
| Dimensions |
186mm*150mm*43mm(7.32*5.91*1.69 in) |
| |
| (W x D x H) |
| Others |
|
| Stacking Limit |
Maximum of 4 layers when fully packaged |
| Humidity |
5%~90% RH(non-condensing) |
| Storage Temperature |
-40? ~ 70?(-40°F ~158°F),with the most suitable storage condition being room temperature considering humidity |
| Storage Precautions |
Store in a clean,ventilated environment free from corrosive gases,flammable,explosive,and other hazardous chemicals.Keep away from heat sources and sources of strong mechanical vibration |
| Storage Period |
Under the above conditions,the product can be stored for one year.It is recommended to re-inspect and test the product after two years before use |