STONET (ST110GHPDI-2G-130) 8 PORT POE 10/100 2 PORT UPLINK 10/100/1000 130W SWITCH EMNİYET KİLİTLİ

Power Indicator

On

The switch is powered on.

Off

The switch is powered off.

POE / Uplink Indicator (Link/ACT)

On

The corresponding port is connected to a network device but no activity

Flashing

Data is transmitting through the corresponding port.

Off

No device is connected to the corresponding port.

Button

1* Dip Switch

Ports

8*100Mbps POE ports

2*1000Mbps uplink ports

Backplane Bandwidth

5.6 Gbps

MAC Address Table

4K

Maximum POE Output Power

120W

Network Media & Transmission Distance

1000BASE-T: UTP category 5, 5e, 6 or above cable (≤ 100m)

100Base-TX:  UTP category 5, 5e, 6 Category 5 (Cat5) or higher UTP/STP cables (≤100m)

10Base-TX: UTP category Category 6 (Cat6) or higher UTP/STP cables (≤250m)

Tips:The actual transmission distance is related to the connected terminal/network cable type and condition; it is recommended to use Category 6 cable preferentially.

Basic Functions

• Complies with IEEE 802.3 Ethernet and IEEE 802.3u Fast Ethernet protocol standards
• Compatible with IEEE 802.3af/at compliant powered devices (PD)
• Compatible with certified non-standard powered devices (PD)
• Supports store-and-forward switching
• Supports full power output
• Supports automatic MAC address learning and aging
• Extended cable transmission,supports long-distance monitoring power supply
• Supports IEEE 802.3X full-duplex flow control and Backpressure half-duplex flow control

Ethernet Protocols and Standards

• IEEE 802.3 10BASE-T Ethernet
• IEEE 802.3i 10BASE-T Ethernet
• IEEE 802.3u 100BASE-TX Fast Ethernet
• IEEE 802.3ab 1000BASE-T Gigabit Ethernet
• IEEE 802.3af/at, Power over Ethernet
• IEEE 802.3x Flow Control

Data Transfer Rate

POE port :10/100M full-duplex/ half-duplex modes

Uplink port :

10/100M full-duplex/ half-duplex modes

1000M full-duplex mode

Temperature

• Operating Temperature:0? ~ 40?
• Storage Temperature:-40? ~ 70?

Humidity

• Operating Humidity:10% ~ 90% RH(non-condensing)
• Storage Humidity:5% ~ 90% RH(non-condensing)

Altitude

• Operating: Max 6500 feet (2000 meters)
• Storage: Max 6500 feet (2000 meters)

Differential Mode

2KV

Common Mode

4KV

Dimensions

(W x D x H)

186mm*150mm*43mm(7.32*5.91*1.69 in)

Stacking Limit

Maximum of 4 layers when fully packaged

Humidity

5%~90% RH(non-condensing)

Storage Temperature

-40? ~ 70?(-40°F ~158°F),with the most suitable storage condition being room temperature considering humidity

Storage Precautions

Store in a clean,ventilated environment free from corrosive gases,flammable,explosive,and other hazardous chemicals.Keep away from heat sources and sources of strong mechanical vibration

Storage Period

Under the above conditions,the product can be stored for one year.It is recommended to re-inspect and test the product after two years before use